Table Top epoxy resin Pourpoxy
Table top epoxy resin is mainly used to do a final coat over tables to give it a high gloss finish or Coating objects to protect them.
Always wear protection when using epoxy!
This is table top epoxy resin you need to create beautiful pieces of art. Due to its main property, a fast curing time for thin layers it is easy to create epoxy resin project in short amounts of time. Create beautiful masterpieces yourself!
Super easy mixing ratio!
✔Crystal clear Epoxy
✔UV stabilized long brightness guarantee
✔Good adhesion to substrate.
✔Water resistant after curing.
✔Use outdoors after curing due to its UV resistance.
✔Self-ventilating and leveling.
✔Low viscosity causing bubbles to rise to the surface.
✔Easy to color with Pourpoxy Pigments.
✔100 : 55 mixing ratio by weight
✘Not suitable to pour thicker layers than 5MM.
Table top epoxy resin is what you need!
It is a casting resin based on epoxy resin which indicates that a chemical compound mixed together hardens the material. This is done by mixing the B-component with the A-component.
The table top epoxy is designed to level out tables with epoxy resin or coat surfaces in combination with color. For example you can use it to coat a existing table, piece of art, wooden bowl, your wooden bench, a piece of art in incapsulate or to protect objects from wear and tear.
This layer protects and gives a beautiful glass-like appearance. This epoxy resin contains a UV Blocker. This ensures that your casting has a high UV resistance and can therefore also be used outside the house when cured.
TIP: First of all, make sure that the object you want to cast is level.
Our Thick layers of casting resin are easy to use. The product comes in 2 parts. 1 part A-component Epoxy and 1 part B-component hardener. Before casting your project these parts need to be mixed with each other.
The mixing ratio of this product 100 Parts A : 55 Parts B
Pour your project in a dry and clean location with a minimum processing temperature of 15 degrees and a maximum of 25 degrees.
The use of mixing spatulas as opposed to an electric mixer is recommended to ensure that the product remains airless. This ensures that there are fewer air bubbles in your product. During the pouring you will experience that air bubbles rise to the surface. You can easily make these bubbles disappear by going over them with a gas burner. Do this about 2 to 3 times. Or try one of the other ways you can find here.
MIX THE PRODUCTS IN A MIXING CUP OR BUCKET.
When using epoxy always wear protection like gloves and safety glasses! If you are not in a ventilated area use a respirator!
TIP: Use the Pourpoxy Deep pour epoxy to fill bigger and better epoxy resin projects.✔
Check out the link to find out What epoxy you need?.
For any other questions about the product or applicability send us a message!
What do you get?
With an order of the Pourpoxy Table Top epoxy you will receive: